CCM help.

[Hendrick9Fan]

Hey guys.
For some reason everytime I launch CCM it freezes and I have to CTRL ALT DELETE and run task manager and close the task to get the program to exit.
I have read the tutorial, turned off UAC (and yes, I've rebooted) and even downloaded it multiple times.
What is the problem?

------------------
System Information
------------------
Time of this report: 6/21/2014, 23:16:22
Machine name: CHANDLER-PC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite C655
BIOS: InsydeH2O Version 03.61.081.30
Processor: Intel(R) Pentium(R) CPU B960 @ 2.20GHz (2 CPUs), ~2.2GHz
Memory: 4096MB RAM
Available OS Memory: 4044MB RAM
Page File: 4406MB used, 3679MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Intel(R) HD Graphics Family
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_0106&SUBSYS_FCE01179&REV_09
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1366 x 768 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: LGD02DC
Native Mode: 1366 x 768(p) (59.996Hz)
Output Type: Internal
Driver Name: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Driver File Version: 8.15.0010.2353 (English)
Driver Version: 8.15.10.2353
DDI Version: 10.1
Driver Model: WDDM 1.1

 

[Hendrick9Fan]

EDIT: It finally is working properly, I guess it was just my computer being slow.

 

[Hendrick9Fan]

EDIT 2: I have done everything the tutorial says to do and when I press delete, NOTHING.

Can someone please help?

 

[kirbyfighter12]

Question: Is it just NR2003 CCM and your video recording software?
Sometimes the CCM will glitch out if there's something else running.
-I've had that issue when you click NR2003 button launcher, it would freeze until I CTRL ALT DELETE, and I had to save everything I was working on asap before a system restart and got it back working.

Did you also tweak anything recently? (Change any system processes, or anything?)
I've had issues where I tweak some processes in the Services.msc before a race and when I want to relaunch CCM it would glitch out.

Edit: I've also had to Remove CCM completely from the computer (I use Revo Uninstaller Pro)- Redownload it, for some reason it would work after that. So there could be a corruption somewhere in the CCM Folder.

 

[Hendrick9Fan]

I fixed the freeze issue, now my problem is when I press delete, nothing happens. I've done everything the tutorial says.

 

[jacobc62]

I'm getting the freezing problem too. Windows 7, can't say much about system specs after that.

 

[kirbyfighter12]

I fixed the freeze issue, now my problem is when I press delete, nothing happens. I've done everything the tutorial says.

I sometimes have to go into replay -> Hit Escape, and that sometimes will activate it.

 

[Mystical]

I used to have CCM working as well but now it never does anything when I press the delete key as well.

No idea since I have had it setup like it always should be. Just not very compatible with windows 7 I suppose.

 

[Jr_Fan]

I can only get it to work with cup physics on Windows 7.