Latest resources

61 - Aisin Supra - NAS daniele
5.00 star(s) 3 ratings
Downloads
148
Updated
42 - Unsponsored Supra - ROA daniele
5.00 star(s) 2 ratings
Downloads
120
Updated
13 - A-Game Mustang - TAL daniele
5.00 star(s) 2 ratings
Downloads
120
Updated
13 - Janiking Supra - ROA daniele
5.00 star(s) 2 ratings
Downloads
119
Updated
66 - Litf Kits 4 Less Supra - MAR1 daniele
66 - Litf Kits 4 Less Supra - MAR1
5.00 star(s) 3 ratings
Downloads
132
Updated

NWS11 Speedway Spoiler Preview

Status
Not open for further replies.

Angel Casique

Senior Member
SRD Member
Messages
645
Reaction score
260
Here's something i've been working on lately.

Temp: SRD
Braces are from an SRD NNC07 Temp
Metal Texture by Me
Render By Me
and thanks to Smoke-OR for his Mental Ray scene.
 

Angel Casique

Senior Member
SRD Member
Messages
645
Reaction score
260
Nice you should do one for BR2011 ;)

Im also working on the BR version too.

Preview:

Might have to redo it a little bit on this one.
Everything is Mine except for the car which was one of Thunder98's Pre Season thunder cars. The braces are from a Papy Cup temp. Rear Spoiler shading is by SRD. Render scene is by Rouge.
 
Last edited:

Harry Nurpplez

Making a comeback!
SRD Member
Messages
4,788
Reaction score
1,574
Decent but not quite there yet.

(NWS) The main spoiler piece seems too light, 85/85/85 (on 0-255 color scale) is what looked close enough when I did this for BR10.
(both) Weld beads on the back.
(both) The top of the back plate of the spoiler(or whatever you call it) needs to be about ten pixels higher or so depending if this is for 2048 or 1024. See below.
(both) Can't see the front so I don't know if you have the bolts where the top of the braces connect. See Here
(both) At the top of the back plate is a row of seven or eight points that connect it to the spoiler itself. See Here Also on the front of the spoiler.
 

Angel Casique

Senior Member
SRD Member
Messages
645
Reaction score
260
Based on o86gf's feedback

(NWS) The main spoiler piece seems too light, 85/85/85 (on 0-255 color scale) is what looked close enough when I did this for BR10.
My answer: Yeah I am just testing with the colors to get the textures right.

(both) Weld beads on the back.
My answer: I will try to do my best re work them.

(both) The top of the back plate of the spoiler(or whatever you call it) needs to be about ten pixels higher or so depending if this is for 2048 or 1024. See below.
My answer: I will rework them.

(both) Can't see the front so I don't know if you have the bolts where the top of the braces connect.
My answer: Yeah there are there Im just to lazy to do two renders.

(both) At the top of the back plate is a row of seven or eight points that connect it to the spoiler itself.
Will add those on there.
 
Last edited:
Status
Not open for further replies.
Top